Heartland Toledo XT User Manual download pdf (Page 43)

SERVICING - WARNING

Disconnect from electricity and gas before servicing. Check ap pli ance is safe when you have finished.

Lower control panel clear.

Unscrew the tap bypass screw.

A valve bypass screw

Using a pair of long nose pliers carefully remove the

bypass screw and ﬁ t the correct replacement screw.

Tighten the screw down.

Save the screws removed from the appliance for

possible future use.

Valve Bypass screws

Natural Gas Propane Gas

Wok burner 82 49

Large Burner 70 38

Medium Burners 53 31

Small Burner 43 22

Gas Regulator

Remove the storage drawer. Pull it out to its furthest

point.

Lift up the ends of the plastic clips (one each side)

to release the catches holding the drawer to the side

runners and at the same time pull the drawer forward

and away from the side runners. For safety’s sake

push the drawer runners back out of the way.

The regulator is now accessible.

The regulator may be one of two types.

Type 1

Unscrew the hexagonal nut in the front of the

regulator. The regulator nut has a plastic snap in

converter device on the underside, to convert the

regulator snap the device out of the nut and reﬁ t the

other way up.

set for Natural gas set for Propane gas

The snap in converter device is marked to show

which gas it is set for. Make sure the device is

secure in the base of the nut and reﬁ t the nut to the

regulator.

Type 2

The regulator has a

bayonet mounted top

cap.

Using a small coin

press in and turn the

cap to remove it.

Turn the cap over so that the letters “LP” are visible

on base of the hollow in the cap. Reﬁ t the cap

1 2 ... 38 39 40 41 42 43 44 45 46 47 48

Comments to this Manuals

No comments

Heartland Toledo XT User Manual Page 43

Comments to this Manuals

Related products and manuals for Cookers Heartland Toledo XT